
Thursday, April 26, 2007
GALVANIZATION
In current use, it typically means hot dip galvanizing, a metallurgical process that is used to coat steel or iron with zinc. This is done to prevent corrosion of the ferrous item; while it is accompalished by non-electrochemical means, it serves as electrochemical purpose.
HOT DIP GALVANIZING is a form of galvanization. It is the process of coating iron or steel with a thin zinc layer, by passing the steel through a molten bath of zinc at a temperature of around 460 °C. When exposed to the atmosphere, pure zinc reacts with oxygen to form zinc oxide, which further reacts with carbon dioxide to form zinc carbonate, a dull grey, fairly strong material that stops further corrosion in many circumstances. Galvanized steel is widely used in applications where rust resistance is needed.
HOT DIP GALVANIZING is a form of galvanization. It is the process of coating iron or steel with a thin zinc layer, by passing the steel through a molten bath of zinc at a temperature of around 460 °C. When exposed to the atmosphere, pure zinc reacts with oxygen to form zinc oxide, which further reacts with carbon dioxide to form zinc carbonate, a dull grey, fairly strong material that stops further corrosion in many circumstances. Galvanized steel is widely used in applications where rust resistance is needed.
Tuesday, April 24, 2007
COLD ROLLING PROCESS
Cold rolling is a metalurgical process in which metal is passed through a pair of rollers at a temperature below its recrystallization temperature. This process hardens the metal, by compressing and stretching the metal crystals. After the rolling process, the metal is annealed by heating it above the recrystallization temperature after every few rollings, to prevent it from becoming brittle and cracking.
HOT ROLLING PROCESS
Hot rolling is primarily concerned with manipulating material shape and geometry rather than mechanical properties. This is achieved by heating a component or material to its upper critical tempearture and then applying controlled load which forms the material to a desired specification or size.
Monday, April 23, 2007
STEEL MAKING PROCESS
Steel is an alloy of iron and carbon. It is produced in two-stage process.
First, iron ore is reduced or smelted with coke and limestone in a blast furnace, producing molten iron which is either cast into pig iron or carried to the next stage as molten iron.
In the second stage, known as steel making, impurities such as sulpur, phosphorus, and excess carbon are removed and alloying elements such as manganese, nickel, chromium and vanadium added to produce the exact steel required.
First, iron ore is reduced or smelted with coke and limestone in a blast furnace, producing molten iron which is either cast into pig iron or carried to the next stage as molten iron.
In the second stage, known as steel making, impurities such as sulpur, phosphorus, and excess carbon are removed and alloying elements such as manganese, nickel, chromium and vanadium added to produce the exact steel required.
STEEL ALLOYING ELEMENTS AND RESULTANT PROPERTIES
Other materials are often added to the iron-caron mixture to tailor the resulting properties.
NICKEL AND MANGANESE
When added in steel, it add to its tensile strength and make austenite more chemically stable.
CHROMIUM
It increases the hardness and melting temperature.
VANADIUM
It also increases the hardness while reducing the effects of metal fatigue.
CHROMIUM AND NICKEL
Lare amount of chromium and nickel (often 18% and 8% respectively) are added to stainless steel so that a hard oxide forms on the metal surface to inibit corrosion.
TUNGSTEN
Tungsten interferes with the formation of cementite, allowing martensite to form with slower quench rates, resulting in high speed steel.
On the other hand Sulphur, nitrogen and phosphorusmake steel more brittle , so these comonly found elements must be removed from the ore during processing.
NICKEL AND MANGANESE
When added in steel, it add to its tensile strength and make austenite more chemically stable.
CHROMIUM
It increases the hardness and melting temperature.
VANADIUM
It also increases the hardness while reducing the effects of metal fatigue.
CHROMIUM AND NICKEL
Lare amount of chromium and nickel (often 18% and 8% respectively) are added to stainless steel so that a hard oxide forms on the metal surface to inibit corrosion.
TUNGSTEN
Tungsten interferes with the formation of cementite, allowing martensite to form with slower quench rates, resulting in high speed steel.
On the other hand Sulphur, nitrogen and phosphorusmake steel more brittle , so these comonly found elements must be removed from the ore during processing.
Subscribe to:
Posts (Atom)